< Previous PageTurned Hemlock Balusters (Spindles)
# MS/SM-
Our Turned Hemlock Balusters are made of the finest quality clear, solid, kiln-dried Western Hemlock. Quantity discounts available. For exterior projects it's very important to install Balusters using
Sloped-top Bottom Rail. We can notch Baluster bottoms to perfectly fit this Rail.
For 12" and shorter Balusters see
Chunky Spindles. Also, see
Turned Cedar,
Plain Square,
High Density Polyurethane,
Sawn, and
Interior Balusters. And here's a
money-saving Baluster tip.
To see PRICES please make a selection from the Design & Size dropdown below.
3" MS-Traditional - A
3" x 24" (MS-CL324-H)
3" x 28" (MS-CL328-H)
3" x 32" (MS-CL332-H)
3" x 36" (MS-CL336-H)
|
3" MS-Designer
3" x 24" (MS-D324-H)
3" x 28" (MS-D328-H)
3" x 32" (MS-D332-H)
3" x 36" (MS-D336-H)
|
2" MS-Traditional - A
2" x 18" (MS-CL218-H)
2" x 24" (MS-CL224-H)
2" x 28" (MS-CL228-H)
2" x 32" (MS-CL232-H)
2" x 36" (MS-CL236-H)
|
2" SM-Hampton
2" x 24" (SM-5005n24-H)
2" x 28" (SM-5005n28-H)
2" x 32" (SM-5005n32-H)
2" x 36" (SM-5005n36-H)
2" x 42" (SM-5005n42-H)
|
To see PRICES please make a selection from the Design & Size dropdown below.
Nominal (trade) sizes are listed above with actual sizes listed just below and in the Design & Size dropdown.
CA Resident WARNING Actual Cross Section Sizes (at square tops and bottoms) for the Balusters on this page. Actual lengths are listed in the
Design & Size dropdown below.
3" = 2-3/8" x 2-3/8" actual
2" = 1-5/8" x 1-5/8" actual
See
Hemlock Turned Baluster Measurements Chart for length of turnings and square tops and bottoms.
Quantity Based Pricing
Price is
per Baluster, based on TOTAL quantity of Balusters in any
one design/size combination.
See explanation and examples.
VERY IMPORTANT! Read before ordering:
1. Actual sizes are listed in a paragraph above and in the
Design & Size drop down below.
2. Some orders may require additional shipping charges. If so, we will advise before finalizing your order.
3. Baluster Information (Size Matching Chart, Height Calculator, Qty Needed, Spacing, Installation, etc.)