< Previous Page

Polyurethane Door & Window Caps, pg 2

# SP-DW (caf)

Each Door & Window Cap is made with "returned" ends; that is, the profile continues on each end. We also sell "straight" pieces of these Mouldings without returned ends. Please inquire.  Read more about Polyurethane


or order a small Sample
Projection is distance out from wall to front edge of Moulding.
Height is distance along wall from top to bottom of Moulding.
"K" number refers to a matching Keystone.

Projection is distance out from wall to front edge of Moulding.
Height is distance along wall from top to bottom of Moulding.
"K" number refers to a matching Keystone.
Important Ordering Info
The lengths listed in the Door & Window Cap Design dropdown below are breast board lengths (as shown in the photo just above) and NOT the overall Cap length. Typically, the breast board length should equal your overall width to the outside edges of your Casing (trim), so that the ends of the breast board will be flush with the outside edges of your Casing.

If your needed breast board length falls between two of the lengths listed in the Door & Window Cap Design dropdown below, please select the next longer length and then use the Comments box during Checkout to indicate the exact breast board length you require.      CA Resident WARNING

Some of our Poly Door & Window Caps do not project out sufficiently at the bottom to accept all Pilasters. Please inquire if you wish to use Pilasters beneath a Door & Window Cap or see Poly Entrance & Window Systems.

SALE LISTINGS - Items listed immediately below are 75% off!
Online price cannot calculate the Sale discount, but your final invoice WILL show the discount. If your order exceeds the available Sale quantity listed below, extras will be at our regular price.
CSH 1267-124" - 2 available. Split in half.

VERY IMPORTANT! Read Before Ordering:
        1. Important Additional Info
        2. Important Shipping Info
           (You can usually avoid extra shipping charges by using a Keystone.)