< Previous Page

OLD PAGES - Rail, Bottom Flat-top (5618)

# Discontinued Flat-top Bottom Rail Page
(nsnf)

Important - Not for exterior use unless both Rail and Balusters are made of PVC. Otherwise, inadequate water drainage may create premature rot. Flat-Top Bottom Rails will not look as traditional nor as substantial as our sloped-top style, but they do allow easier installation of Balusters on stairs because compound notching of Baluster bottoms is eliminated.


Our Flat-Top Bottom Rail has two interlocking pieces. This provides easy installation, hidden hardware, and substantial, traditional styling! Just screw top piece of Railing into bottom of the Balusters. Then, using our pre-drilled holes, screw bottom piece of Railing into place. This two-piece format also permits easy pinstripe painting.

Kickspace Blocks are used to support longer Balustrade sections at an appropriate height above the porch floor. Use one Kickspace Block evenly spaced under every 4 or 5 feet of Bottom Rail.

Also see Interior Bottom Rails in our Interior Stair Parts section. A motor freight surcharge may be required on small orders for longer lengths. If so, we will advise before finalizing your order.

Note: We suggest you consider Cypress or AZEKŽ Brand Cellular PVC (synthetic wood) if you want to upgrade from Poplar for exterior use.

Compatible Balusters	Rail Measurements
Width of Balusters	Top thickness x width	Bottom thickness x height	Assembled Dimensions width x height
2-7/8" to 3-1/2"	3/4" x 4"	3" x 3"	4" x 3-5/8"

Samples
Bottom Rail Samples are available.         Material Choices

VERY IMPORTANT! Read before ordering:
        1. Important Product Details
        2. Important Shipping Info